Building a paper structure kit will not require elaborate of expensive tools, though it's always
advisable to acquire quality tools.
The following is a suggested list of tools that you should have available.
Cutting surface – Plate Glass or Cutting board. This is required as you will need to produce sharp straight
Sharp knife (X-acto or similar)
Spare Blades. You'll need lots of them as a slightly dull blade will tear the paper before it cuts.
Straight edge (to guide the cuts)
White Glue. You may also want to have some ACC on hand for when a quick set up it required.
Toothpicks. To apply small drops of glue.
Felt Pen in a dark colour, preferably gray, brown or dark green
This Web page is maintained by
Grant Knowles and was last
updated on Dec 05, 2011.